smartrack bolt-down kit - secures stabilizing brackets or plates to facility floor model number: SRBOLTDOWN description tripp lite's smartrack SRBOLTDOWN provides extreme stabilization and security for cabinets and racks. the bolt-down kit enables smartrack to be secured to a concrete floor. SRBOLTDOWN includes four concrete inserts, four bolts and four fender washers. technical notes: we recommend using a 1/2" concrete drill. hole must be 4.5" to 4.75" deep. mark the hole, drill the hole, then tap the anchor into the hole. thread the bolt into the anchor a few threads only. tap the bolt with a hammer (with anchor attached) until it bottoms out in the hole, then tighten the bolt. features provides extreme stabilization and security for cabinets and racks the bolt-down kit enables smartrack to be secured to a concrete floor includes four concrete inserts, four bolts and four fender washers specifications physical shipping dimensions (hwd / in.) 1 x 4 x 4 shipping dimensions (hwd / cm) 2.54 x 10.16 x 10.16 shipping weight (lbs.) .90 shipping weight (kg) 0.41 warranty highlights bolt-down kit for cabinets and racks enables smartrack to be secured to concrete floor provides extreme stabilization and security includes required nuts and bolts package includes four concrete inserts, four bolts, four fender washers 1 / 2
product warranty period (worldwide) 5-year limited warranty ? 2015 tripp lite. all rights reserved. all product and company names are trademarks or registered trademarks of their respective holders. use of them does not imply any affiliation with or endorsement by them. tripp lite has a policy of continuous improvement. specifications are subject to change without notice. tripp lite uses primary and third-party agencies to test its products for compliance with standards. see a list of tripp lite's testing agencies: http://www.tripplite.com/products/product-certification-agencies 2 / 2
|
